Some people wonder why grout sealing is an essential step in any tile installation process, especially in New Jersey. The simple answer is that sealing the grout will help your tiles look clean for several years. Porcelain tiles and ceramic tiles should not be sealed because they are very dense but grout should definitely be sealed. This is because grout is very porous and these unsealed porous are going to attract grime, dirt and grease alongside other things. Apart from that, if the grout is not sealed and cleaned then sanitized, extremely harmful bacteria and even mold which is toxic can grow in these grout lines. Such bacteria can cause a lot of health risks to your pets and family members.
The best time to get your grout sealed is when the grout is still new. This is because when it is new, it didn’t have any chance to get dirty or to absorb any kind of dirt, grime or any other harmful things. On the other hand, if you are planning to get the grout sealed after a while, it means that it has already absorbed grim and dirt. This is why it should be deep cleaned carefully before sealing. This is done in order to guarantee that you do not seal in the dirt and the grime.
You will find different types of grout sealing tools and materials on the market. These sealers can be easily found at the local tile shops and stores in New Jersey. It is also advised not to buy any aerosol sealers because according to studies, these materials represent health hazards. There are 2 main kinds of sealers. These two types are water based sealers and solvent based sealers. The easiest type to apply is the solvent based sealers. It will easily absorb deeper in the grout and does not cause a lot of problems. On the other hand, some people prefer using water based sealers because they do not have any smell. As for performance, both kinds are of the same quality and they give high quality results.
The process of applying the sealer is pretty easy. You will need a brush applicator or a sealer roller. You will use these tools in order to apply the sealer liberally on the grout lines between the tiles. After applying it, you will have to leave it for almost five minutes and then start to clear the excess sealer off the tiles. You can clean that by using a paper towel or a clean dry rag. If you notice any kind of streaking as a result of the sealer, you will have to add some sealer and repeat the process again. You should also apply the sealing material on as many tiles as you can before you wipe out the excess and move to another section. You should then leave the sealer for twenty four hours to dry. When it dries, your tiles will be protected and all of the grout between your tiles will be sealed successfully.
Source : http://goarticles.com/article/Why-Is-Grout-Sealing-Important-and-How-to-Successfully-Do-It/7272327/
